Digital Current Indicator Three Phases Committee Ammeter Three Phases Built-in

DJ-A96T - Three-phase digital panel ammeter

The DJ-A96T three-phase digital ammeter is designed for accurate current monitoring in three-phase systems. It can display the instantaneous load on each phase L1, L2, L3 using external current transformers (CT). The device offers a clear display, easy setup, and reliable operation.

Main features

• Current measurement in three-phase systems

• Separate reading for phases L1, L2, L3

• Measurement with external current transformers

• Easy adjustment of CT ratio

• Large and readable display - 3×4 digits, height 14 mm

• Compact panel design

Technical parameters of the ammeter

• Supply voltage: 230 V AC

• Device consumption: < 4 VA

• Current measurement range: 0.1...5.5 A

• Supported CT range: 5/5 A to 5000/5 A

• Measurement accuracy: ±2%

• Display: LED, 3×4 digits, height 14 mm

• Dimensions: 97,2 × 97,2 mm

• Cutout dimensions: 91 × 91 mm

• Depth: 45 mm

• Package does not include current transformers (can be purchased separately)

Operating principle and settings

1. Connect the device according to the wiring diagram.

2. Connect the current transformers according to the expected current in the system (conversion xxxx/5 A).

3. Connect the CT wires to the terminals "kx" and "lx". The CT output must not exceed 5 A.

4. After turning on the power, press and hold the "Menu" button for 2 seconds.

5. Use the Up/Down buttons to set the conversion of the CTs used.

6. Save the settings by pressing and holding the "Menu" button.

7. When the load is connected, the ammeter starts measuring and displaying the current.

Note: Current transformers must always be grounded for safety reasons.

Technical characteristics of the solid-state output relay

(This time the listed parameters match the SSR - if it needs to be separate, I can split it).

• Relay type: solid-state

• Control voltage (input): 3...32 V DC

• Switching voltage: 24...480 V AC (not suitable for motors)

• Voltage drop when switching: < 3 V

• Switching current: 5 mA

• Coil voltage: 3...32 V DC

• Maximum switching current: 25 A

• Insulation strength: 2500 V AC

• Switching method: switch on when current passes zero crossing